350L Automatic Washing Disinfector

Feature & Technical specification

1. CE conformity.  Equipment category: fixed

2. Outer box size: 950*825*2060 (length*width*height)

3. Cleaning cabin size: 627*595*980 (length*width*height)

4. Total volume: 350L

5. Power supply: 3N～220V, 50Hz

6. Power: 31kVA

7. Ambient temperature: 5℃～40℃

8. Relative humidity: ≤80%

9. Atmospheric pressure range: 70kPa～106kPa

10. Water supply pressure: 0.2MPa～0.5MPa

11. Inlet water temperature: 5℃～40℃

12. Material of working cabin: stainless steel 304

13. Load frame trolley material: stainless steel 304

14. Working noise: the working noise of the automatic washer-disinfector is not more than 75dB(A)

15. Uses: Mainly used for cleaning, disinfection and drying of endoscopes, scalpels, hemostatic forceps, tweezers and dental instruments

16. Leveling device: In order to adapt to uneven ground, the equipment is equipped with a leveling device, and the maximum allowable horizontal tilt angle of the washer-disinfector is 5 degrees

17. Main body insulation: ≥5mm insulation cotton, with low thermal conductivity, good fire resistance, strong anti-aging ability,

18. Non-toxic and environmentally friendly, high-grade appearance and soft texture

19. Display screen: 7-inch color touch screen, communication rate ≥ 19.2Kbps

20. Automatic control system: using human-computer interface and Mitsubishi PLC, precise control, safe and reliable, one key

The whole process is automatically completed, the temperature and cleaning time are displayed, and the system can be maintained and upgraded

21. Printer: Micro-printer is used to print various data of the whole cleaning process, which can be stored for a long time.

22. It can print information such as mode name, cleaning date, thermal drift A0 value data, cleaning time and end status of each stage

23. Multiple operating modes: The product has multiple built-in cleaning programs for users to choose from, and is suitable for a variety of cleaning scenarios

24. Water circulation pump: The German Hanning brand water circulation pump is used, which has the characteristics of large flow rate, high flow rate and high temperature resistance, which can ensure sufficient water flow circulation in the cleaning process in the cabin.

25. High-pressure fan: vortex type high-pressure fan is adopted, with large air volume, high wind speed and strong wind pressure, and continuously flowing air into the cleaning chamber

26. Hot air box: heating the flowing air into the cleaning chamber

27. Air inlet filter: use high-efficiency filter to prevent the dry load air from being polluted by microorganisms Water heating: use high-power electric heating tube, the contact area between the heating tube and the water is large, the heating speed is fast, and it can be quickly in the process of water circulation Heating to set temperature value

28. Water spray system: There are rotating spray arms on each layer, with optimally arranged spray holes on the spray arms. The designed angle and quantity can be well matched with the rapid rotation of the spray arms to achieve the best cleaning effect. The nozzle is equipped with a filter to prevent the spray arm from clogging

29. Cooling fan: A cooling fan is installed on the top of the machine, which can better remove the heat accumulated inside the machine

30. Water supply and drainage system: use braided hose and water adding solenoid valve, which can withstand normal water pressure and control the amount of water added.

31. Use a drain pump to drain the waste water in the cleaning chamber, and the unique S-shaped backflow design drain line to prevent wastewater return

32. Circulation pipeline: high temperature resistant silicone tube is used to connect the circulation pipeline, and glue is applied at the joint installed in the cleaning chamber to prevent water leakage

33. Cleaning agent filling: In order to ensure the accurate measurement of the filling cleaning agent, a peristaltic pump is used for filling, and a liquid level detection device is installed in the bucket to detect the remaining amount of chemical additives in the bucket. If the remaining cleaning agent is not enough for the next cleaning, there will be a screen prompting the user to add cleaning agent

34. Cabin door design: manual double door, when the front door or the rear door is not closed, the equipment cannot run, and the display screen prompts that the door is not closed, when the cleaning program starts, when the operator opens the front door or the rear door, the equipment automatically stops running, And the display shows that the door is not closed, the buzzer sounds an alarm, and the doors on both sides of the sterilizer cannot be opened at the same time to prevent air convection failure. Abnormal gallbladder temperature,

35. When the air pressure is abnormal, the water is overtime, the drainage fails, and the front/rear doors are not closed, a buzzer will sound, and the machine screen will display an alarm message

36. Temperature control device: the temperature sensor adopts PT1000 platinum resistance, and the range is 0℃～200℃

37. Emergency stop device: Emergency stop device is installed on the loading side and unloading side of the equipment, which can perform emergency power off when the equipment fails

38. Timing device: The time of each stage can be set and displayed through the touch screen. When the time is less than 5min, the accuracy is ±2.5%; when it exceeds 5min, the accuracy is ±1%