21L Ethylene Oxide Sterilizer

Application

Beauty clinics, medical and health departments, etc.

Feature & Technical specification

1. CE conformity.  Product form: manual door table

2. Heating method: electric heating

3. Power: 3.3kVA

4. Power supply: AC220V 50Hz

5. Dimensions (L×W×H): 730×510×410mm

6. Liner size (diameter x depth): 246 x 450mm

7. Effective volume: 21L

8. Weight: 45kg

9. Display: 3.5 inch LCD screen

10. Sterilization chamber material: 304 stainless steel

11. Outer box material: ABS plastic

12. Temperature during sterilization: 50℃±3℃

13. Working pressure: -60kPa

14. The highest pressure resistance value: -80kPa

15. Humidity during sterilization: 40%-85%

16. Select gas pure ethylene oxide gas

17. Sterilization time: 0-999 hours adjustable

18. Pump the vacuum to -60kPa within 15 minutes

19. Water storage capacity distilled water tank 1.5L, decomposition water tank <1.5L

20. One-time sterilization water consumption: The water consumption of distilled water is less than 30mL, and the water consumption of decomposed water is less than 3L (directly related to the size of water pressure)

21. Automatic ventilation for air replacement, 5 times of ventilation, every 15 minutes

22. The sterilization record system can store 500 times of sterilization records

23. Display status Display running status, temperature, humidity, pressure, sterilization time, residual gas treatment time, times, steam generator temperature

24. The printer adopts a micro-printer, which prints out the data every minute in the whole process of sterilization, which can be stored permanently

25. The USB interface upgrades the system program and reads the historical data during the sterilization process

26. Humidity sensor The built-in humidity sensor automatically detects the humidity in the sterilization room

27. The built-in pressure sensor of the pressure transmitter automatically detects the pressure in the sterilization chamber

28. Temperature sensor The built-in temperature sensor automatically detects the temperature in the sterilization room

29. The vacuum system adopts oil-free vacuum pump

30. Sealed door 304 stainless steel aluminum, thickness ≥2mm, pressure resistance 200kPa

31. Pulsed steam humidification under negative pressure of humidification system

32. The filtration rate of the air filter device filter to the particle diameter>0.3μm, not less than 99.5%

33. Determination of the leak rate in the sterilization chamber The temperature of the sterilization chamber remains unchanged at no load, the test pressure is -70kPa, and the measurement time is 15min

34. The average leakage rate during the measurement time is ≤0.13kPa/min

35. Automatic dosing sterilization chamber built-in piercing technology

36. The heating system sterilization chamber adopts explosion-proof electric heating device

37. A variety of protection functions are provided with overvoltage and overtemperature protection functions, which are more secure and reliable

38. The alarm system includes high and low temperature alarm system, low pressure alarm system, steam high temperature alarm system, leak rate detection alarm system, sealed door detection alarm system, dosing detection alarm system

39. If the power is cut off during the sterilization process of the power-off memory function, the screen will prompt "Yes" or "No" to continue the last operation after the power is turned on again.

40. At this point, you can select "Yes" to continue the last run. You can also select No to cancel the run. If there is no operation for ten minutes, the system will select "Yes" by default and continue to operate in the working state when the power is cut off.